Explore common cast component types for machine builders and industrial equipment OEMs. Share your drawing to define the material, geometry, machined features and inspection requirements.
Illustrations show representative part geometries. Final material, dimensions and supply condition follow your approved drawing.
01
Machine Tools & CNC Equipment
Structural castings for machine assemblies, with reference surfaces and mounting features defined by your drawing.
Typical parts: Machine beds, columns, worktables, spindle housings and equipment bases.
Drawing focus: Datum faces, guideway mounting surfaces, bearing bores and hole positions.
02
Workholding & Fixture Components
Cast bodies and supports for fixtures used to locate and hold workpieces during manufacturing.
Typical parts: Vise bodies, fixture bases, clamping brackets, locating supports and custom jaw blanks.
Drawing focus: Mounting faces, locating bores, jaw interfaces and specified contact profiles.
03
Automation & Robotics
Housings and mounting structures for automated equipment and robot assemblies.
Typical parts: Gripper housings, joint housings, mounting bases and connecting brackets.
Drawing focus: Assembly interfaces, pivot bores, mounting patterns and required clearances.
04
Gearboxes & Power Transmission
Cast housings and drive components for gearboxes, reducers and mechanical transmission assemblies.
Typical parts: Gearbox housings, reducer cases, bearing housings, coupling hubs and belt pulleys.
Drawing focus: Bearing fits, shaft alignment, cover faces and mounting interfaces.
05
Pumps, Valves & Fluid Handling
Cast bodies and flow-path components for pumping, fluid transfer and valve assemblies.
Typical parts: Pump casings, volutes, impellers, valve bodies and valve covers.
Drawing focus: Flange faces, sealing seats, shaft bores and specified inspection requirements.
06
Compressors & Vacuum Equipment
Housings, covers and supports for compressor and vacuum-equipment assemblies.
Typical parts: Compressor casings, crankcases, cylinder heads, end covers and bearing supports.
Drawing focus: Bores, sealing faces, bearing locations and mating-cover geometry.
07
Motors & Industrial Fans
Cast housings and rotating-part geometries for electric motors and industrial air-handling equipment.
Typical parts: Motor housings, end covers, fan casings, impellers and mounting flanges.
Drawing focus: Shaft fits, bearing seats, mounting faces and any specified balance requirements.
08
Conveyors & Material Handling
Cast supports and mechanical components for conveyor and material-handling assemblies.
Typical parts: Roller brackets, bearing blocks, wheel bodies, sprockets and guide supports.
Drawing focus: Axle bores, mounting holes, mating profiles and alignment features.
09
Packaging, Printing & Textile Machinery
Linkages and supports for packaging lines, printing presses and textile machinery.
Typical parts: Support arms, connecting links, cam blanks, bearing supports and guide components.
Drawing focus: Pivot locations, motion profiles, mounting faces and assembly clearances.
10
Mixing & Process Equipment
Cast component geometries for mixing, food-processing and water-treatment equipment.
Typical parts: Agitator impellers, pump bodies, valve bodies, equipment housings and supports.
Drawing focus: Contact surfaces, cleanability, finish and material requirements for the project.
11
Mining & Bulk Material Processing
Cast structures and replaceable components for mineral processing and bulk-material equipment.
Typical parts: Crusher liners, wear bushings, feeder components, bearing housings and support castings.
Drawing focus: Wear surfaces, mating profiles, mounting holes and required material performance.
12
Industrial Tools & Operating Hardware
Custom bodies and operating parts for industrial tools and manually adjusted equipment.
Typical parts: Handwheels, operating handles, levers, tool bodies and custom tool blanks.
Drawing focus: Grip geometry, pivot bores, mating faces and specified strength requirements.
Have a component outside these categories? Send your drawing, material specification and expected quantity for a manufacturing review.